The following is a list of all SYS, POKE and ESC commands
that I have gathered and put together.  The sources I used
were all from other BBS users files which I have compiled
into one list.  Please let me know if there are any Listed
commands which DO NOT work.  Also if you know of anyothers
that are not listed please include in some E-Mail to me.

                               Ira Ashkenes

GEnie I.D.                    IASHKENES
QLINK I.D.                    IraA
JAYRAYS CONNECTION I.D.       JR139



command         function/action                                  
--------------------------------------------------------------------------------
sys 65520,r,c,0     set/read cursor position (preface sys by read/set)
sys 65408           kernal id byte (peek(65408))                      
sys 65375           toggle between 40 & 80 column screen              
sys 65375           toggle 40/80 column                               
sys 65366           software cold reset                               
sys 65363           auto-boot disk                                    
sys 65357           go 64 with are you sure message                   
sys 65354,a         closes all files of device in 'a'                 
sys 65341           machine reset                                     
sys 57416           go 64 without are you sure message                
sys 54784           vdc version (peek(54784)and7)                     
sys 52689           reads vdc register                                
sys 52684           writes to vdc register (value 'a' is written to x 
sys 52639           truns cursor off                                  
sys 52591           turns cursor on                                   
sys 52040           80 column screen normal                           
sys 52031           invert 80 column screen                           
sys 51966           enable underline cursor                           
sys 51954           enable block cursor                               
sys 51900           scroll up                                         
sys 51871           clears form cursor to screen end                  
sys 51851           clears from start of line to cursor               
sys 51830           clears form curosr to line end                    
sys 51794           clears current line                               
sys 51748           clears all windows                                
sys 51739           set window sys51739,toprow,topcol,botrow,botcol   
sys 51602           genterates tone always                            
sys 51598           sounds bell if shift/c= not disabled              
sys 51372           enabels shift/c= switch                           
sys 51366           disables shift/c= switch                          
sys 51346           switch to upper case                              
sys 51328           switch to lower case                              
sys 51317           cursor left in window                             
sys 51303           cursor up in window                               
sys 51290           cursor down in window                             
sys 51284           cursor right in window                            
sys 51069           cancels quote & reverse mode                      
sys 50341           clears line number in X register(sys50341,,x<0-12>
sys 49488           basics' home cursor                               
sys 49482           home window cursor                                
sys 49474           basics' clr/home cursor                           
sys 49164,char      prints a character (ascii) i.e. 49164,<char>      
sys 49155,a,b       prints a character to screen sys49155,char,color  
sys 49152           kernals warm start                                
sys 44953           runs the basic program in memory                  
sys 42977           Prints "are you sure" message                     
sys 32800,123,45,6  Commodore Credits - most interesting of them all
sys 19767           entry - basics ready mode                         
sys 16795           print power up message                            
sys 16387           basics' warm reset                                
sys 16384           basics' cold reset                                
poke808,50          disable save                                      
poke808,28          enable save                                       
poke808,112         Disable run/stop                                  
poke808,110         enable run/stop                                   
poke808,100         disable run/stop                                  
poke792,98          disable restore                                   
poke792,64          enable restore                                    
poke792,125         disable restore                                   
poke775,81          enable list                                       
poke775,139         disable list                                      
poke774,38:775,139  list line numbers only
poke774,61:775,255  warm start on list 
poke65341           cold reset                                        
poke4140,0          moves shift run/stop to help key                  
poke2599,1          normal cursor 40 column                           
poke2599,0          blink cursor 40 columns                           
poke2593,1          waits for keypress                                
poke2592,10         enable keyboard                                   
poke2592,0          disable keyboard                                  
poke249,128         beep off                                          
poke249,0           beep normal                                       
poke248,64          unlink screen lines                               
poke248,128         scrolling off                                     
poke248,0           scrolling normal                                  
poke24,37           list without line no.                             
poke24,27           list with line number                             
poke208,0           clear keyboard input buffer before input          
esc z               clears all tab stops                              
esc y               sets default tab stops                            
esc x               switches 40 to 80 column and 80 to 40 column      
esc w               scrolls screen down one line                      
esc v               scrolls up one line                               
esc u               sets underline cursor                             
esc t               sets top left corner of window                    
esc s               sets block cursor (80 column)                     
esc r               reverses 80 column screen                         
esc q               erases to end of logical line                     
esc p               erases to start of logical lines                  
esc o               cancels quote mode (esc-esc also)                 
esc n               sets normal 80 column screen                      
esc m               disables screen scrolling                         
esc l               enables screen scrolling                          
esc k               moves cursor to end of logical line               
esc j               moves cursor to start of logical line             
esc i               inserts a blank screen line                       
esc h               disables bell tone for chr$(7)                    
esc g               enables bell tone for chr$(7)                     
esc f               sets blinking cursor mode                         
esc e               sets nonblinking cursor mode                      
esc d               deletes an entire ligical line                    
esc c               cancels auto insert mode                          
esc b               sets bottom right corner of window                
esc a               enters auto insert mode                           
esc @               clears to end of screen