Bob has provided this detailed listing of the features of BobsTerm
Pro 128, which can be ordered directly from him at the address listed
below in the specs listing, or from your dealer.  Bob does take
"electronic orders" in the Delphi FlagShip Shopping area, as does
Progressive Peripherals directly on the Progressive ONLINE area.
Progressive is the U.S. Distributor for BTPro 64 and BTPro 128.

====================
= BOBSTERM PRO-128 =
====================

Overview of Features:

MODEM COMPATIBILITY
-------------------
Commodore 1650,1660,1670... Westridge, Total Telecom, Mitey-Mo, Hes I &
II, Hayes Smartmodem 300/1200/2400 and most Hayes Compatibles.

UPLOADING/DOWNLOADING
---------------------
Straight Ascii/Binary, Seq Line with Prompt, XON/XOFF-DC1/DC2 Capture,
PUNTER Protocol, XMODEM Protocol (CHECKSUM and CRC), XMODEM Direct to
CP/M, Entire Disk (Track and Sector... Double and Single Sided). All
transfers may be done to/from the buffer or disk. Transfers may also be
viewed.

BUFFER FACILITIES
-----------------
60K Byte Buffer, Fill from Keyboard, Disk, CP/M or Specified Byte #.
Dump to Screen, Printer, Disk, CP/M. Adjustable Partial Dumps, Forward
and reverse Page Viewing, and 9 adjustable Page markers.

BUFFER EDITING
--------------
Full Screen Cursor control, Edits Binary and Text Data, Frwd/Rvs
Scroll, Position Readout, HEX/DEC/BIN Readout, On Screen Range
Settings, Add/Remove Linefeeds, HEX/DEC Direct keyboard Entry, Insert
Line, Delete Ramge, Strip Character, Replace Character, Convert to
Lowercase, Convert to Uppercase, Convert to ASCII, Convert to PETSCII,
Reformat text, Zero Parity Bit, Instant onscreen Help windows.

STATUS LINE
-----------
Always visible, shows Carrier Detect, Buffer ON/OFF, Buffer Bytes
Remaining, Local Echo ON/OFF, Incoming Linefeed ON/OFF, Outgoing
Linefeed ON/OFF, Hook Status, Macro Active Status, Null Filter ON/OFF,
Caps Lock ON/OFF, Wordwrap ON/OFF, ASCII/BINARY mode ON/OFF, Control
Character Display ON/OFF, Timer or Time Of Day Clock.

TERMINAL EMULATION
------------------
Completely User Programmable Emulator with 37 Emulated Functions. Has
Presets for ADM-31, VT-52, VT-100. You can easily create your own
terminals and save them in a Macro or Phonebook File.

BUILT IN FILE CONVERSIONS
-------------------------
Program to SEQ, SEQ to Program, ASCII IMAGE to Program, Program to
ASCII IMAGE (user programmable parameters with Compuserve presets),
Strip Source Code Comments, C128 to CP/M, and CP/M to C128.

AUTOMATED PHONE/MACRO FILES
---------------------------
Unlimited storage, Auto-Dial & Log-on for Each #, Saves all Parameters
with each #, automates all Keyboard commands.

SPECIAL MACRO COMMANDS
----------------------
Pause 1/2 sec, Comkey Prefix, Cursor movement equivalents, RUN/STOP key
equivalents, Carriage Return equivalent, Wait for next character, Wait
for string, Jump to next Macro, Wait for quiet Line, Start Macro again
from character 0-9, Transmit following string, If-Then conditional
wait.

REMOTE MODE
-----------
Remote DOS and Transfer control, acts like a mini-BBS, User defined
Entry Code, and Welcome MSG.



USER ADJUSTABLE PARAMETERS
--------------------------
Character/Screen/Status Line Colors, All RS232 Parameters, Baud rate up
to 2400, Baud Timing trim control, Default Diak Drive and Device #,
Default Macro Drive and Device #, Default Printer Device/Sec Address #,
ASCII or PETSCII Printer Output, Printer Auto-LF switch, 14 character
Printer Control String, Tone or Pulse Dialing, Carrier Detect Switch,
Carrier Phase switch, Line Delays up to 900 ms, Character delays up to
90 ms, also Character Wait-For-Echo, and Correcting Wait-For-Echo,
CRCK/CCITT checksum, XON/XOFF characters, DC1/DC2 characters, XMODEM
EOT/ACK/NAK/CAN and EOF, XMODEM Block Start, XMODEM Character Start,
XMODEM Packet delay Time, Bell and Answerback, Backspace, Htab,
Clr-Screen, 6 character IN-FILTER, Cursor Type, 10 Character Fonts, and
all parameters can be saved as Defaults for Bootup.

ADDITIONAL FEATURES
-------------------
8 Programmable Function keys, Timed Start Macros, and Autostart Macro.

Many other User Freindly features include full use of the high speed
disk mode on 1571 drives, 2 meg Clock Speed, 80 column video, Window
Overlays for instant access Menues and Help Screens, Instant recall of
every INPUT Prompt, Full Input prompt Editing including HEX/DEC direct
keyboard entry. Full DOS Support from within the program including CP/M
Directory.

The list goes on and on...... you must see this program to believe it.

Order now and join the growing BTPRO Family.

Also 24 hour ONLINE TECH SUPPORT by calling:
C.A.A. BBS  702-731-3178  (300/1200)

Price is $70.00 (Check or Money Order Only) Mail order from:
RML Labs
2375 E. Tropicana Ave
Suite #259
Las Vegas, Nv.  89109

Bob Lentini  (RML)