#! rnews 2557 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!news-res.gsl.net!new= s.gsl.net!news.mathworks.com!newsfeed.internetmci.com!info.ucla.edu!agate= !howland.erols.net!cs.utexas.edu!news.ti.com!news.dseg.ti.com!news=09 From: egotrip@lesol1.dseg.ti.com (Mike Neus) Newsgroups: comp.sys.cbm Subject: Re: CMD Hard Drive replacement Date: 5 Aug 1996 18:29:49 GMT Organization: Texas Instruments Lines: 43 Message-ID: <4u5eit$e7v@sf18.dseg.ti.com> References: <01bb7f35$3f24ef40$b52060cc@amazon.channel1.com> NNTP-Posting-Host: cns0599352.dseg.ti.com Mime-Version: 1.0 Content-Type: Text/Plain; charset=3DUS-ASCII Keywords: Hard Drive X-Newsreader: WinVN 0.99.7 In article <01bb7f35$3f24ef40$b52060cc@amazon.channel1.com>,=20 amazon@user1.channel1.com says... > > >Has anyone replaced the hard drive in a CMD hard drive? > >I have a 20 meg CMD hard drive and would like to upgrade the megs to abo= ut >100 megs.=20 > >It seems I have a selection of these drives to buy > >3.5 Quantum >3.5 Maxtor >3.5 Connor >3.5 Seagate > >I have replaced an IDE hard drive before, is it similiar to this and wha= t >brand name of drive would you recommend that I purchase? > >- Paul MacArthur Replacing the drive is easy. If you want you can even dasy chain the new= =20 drive off the back of your HD. If you really want to replace it though, = the=20 new drive must be device 0. Just drop it in, turn it on. After a few=20 seconds the error light flashes (because there is no OS). Run the instal= l=20 DOS program (forget the exact name) from the floppy that came with your=20 drive. When thats complete use the HD tools to create your partitions. As far as brand goes...if Seacrate hadn't bought out Connor I would whole= =20 heartedly recommend one. I have three Connors spread across two computer= s=20 (CBM and IBM) and have never had a lick of trouble with any of them. In=20 fact, the Connor in my IBM survived a rather chilling drop from about fou= r=20 feet onto pavement. Ruined the floppy disks and cracked the case, but th= e=20 hard disk keeps going. I'd bet the Connor line was dropped the day Seacr= ate=20 took over, so if you buy a Connor today it is actually a Seacrate in=20 disquise. My only experience with Seacrate was fairly negative. I've he= ard=20 better reports from newer drives though. My brother likes Quantum and I know somebody who has a 540 disk in his CM= D=20 which has been working good. Maxtor would probably be the last choice of= =20 those you listed primarilly because I know there are lots of compatibilit= y=20 problems with their IDE drives (which may or may not be a problem for SCS= I). #! rnews 2561 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!news-res.gsl.net!new= s.gsl.net!news.mathworks.com!newsfeed.internetmci.com!newsxfer2.itd.umich= .edu!howland.erols.net!cs.utexas.edu!news.ti.com!news.dseg.ti.com!news=09 From: egotrip@lesol1.dseg.ti.com (Mike Neus) Newsgroups: comp.sys.cbm Subject: Re: CMD Hard Drive replacement Date: 5 Aug 1996 18:01:13 GMT Organization: Texas Instruments Lines: 43 Message-ID: <4u5ct9$act@sf18.dseg.ti.com> References: <01bb7f35$3f24ef40$b52060cc@amazon.channel1.com> NNTP-Posting-Host: cns0599352.dseg.ti.com Mime-Version: 1.0 Content-Type: Text/Plain; charset=3DUS-ASCII Keywords: Hard Drive X-Newsreader: WinVN 0.99.7 In article <01bb7f35$3f24ef40$b52060cc@amazon.channel1.com>,=20 amazon@user1.channel1.com says... > > >Has anyone replaced the hard drive in a CMD hard drive? > >I have a 20 meg CMD hard drive and would like to upgrade the megs to abo= ut >100 megs.=20 > >It seems I have a selection of these drives to buy > >3.5 Quantum >3.5 Maxtor >3.5 Connor >3.5 Seagate > >I have replaced an IDE hard drive before, is it similiar to this and wha= t >brand name of drive would you recommend that I purchase? > >- Paul MacArthur Replacing the drive is easy. If you want you can even dasy chain the new= =20 drive off the back of your HD. If you really want to replace it though, = the=20 new drive must be device 0. Just drop it in, turn it on. After a few=20 seconds the error light flashes (because there is no OS). Run the instal= l=20 DOS program (forget the exact name) from the floppy that came with your=20 drive. When thats complete use the HD tools to create your partitions. As far as brand goes...if Seacrate hadn't bought out Connor I would whole= =20 heartedly recommend one. I have three Connors spread across two computer= s=20 (CBM and IBM) and have never had a lick of trouble with any of them. In=20 fact, the Connor in my IBM survived a rather chilling drop from about fou= r=20 feet onto pavement. Ruined the floppy disks and cracked the case, but th= e=20 hard disk keeps going. I'd bet the Connor line was dropped the day Seacr= ate=20 took over, so if you buy a Connor today it is actually a Seacrate in=20 disquise. My only experience with Seacrate was fairly negative. I've he= ard=20 better reports from newer drives though. My brother likes Quantum and I know somebody who has a 540 disk in his CM= D=20 which has been working good. Maxtor would probably be the last choice of= =20 those you listed primarilly because I know there are lots of compatibilit= y=20 problems with their IDE drives (which may or may not be a problem for SCS= I). #! rnews 3199 Path: pravda.aa.msen.com!news1.best.com!newshub.sdsu.edu!newsfeeder.sdsu.= edu!news.sgi.com!enews.sgi.com!news.mathworks.com!newsfeed.internetmci.co= m!newsxfer2.itd.umich.edu!howland.erols.net!cs.utexas.edu!news.ti.com!new= s.dseg.ti.com!news=09 From: egotrip@lesol1.dseg.ti.com (Mike Neus) Newsgroups: comp.sys.cbm Subject: Re: C=3D64 parts Date: 5 Aug 1996 19:04:18 GMT Organization: Texas Instruments Lines: 43 Message-ID: <4u5gji$e7v@sf18.dseg.ti.com> References: <4t37mc$f8g@peabody.colorado.edu> <4tml62$fs1@star.epix.net> NNTP-Posting-Host: cns0599352.dseg.ti.com Mime-Version: 1.0 Content-Type: Text/Plain; charset=3DUS-ASCII X-Newsreader: WinVN 0.99.7 In article <4tml62$fs1@star.epix.net>, xy3951@news.epix.net says... > >BOWEN JASON MICHAEL (bowenjm@ucsub.Colorado.EDU) wrote: >: I used to own a C=3D64 but I sold it to a friends younger brother in 8= 9 and >: haven't used one since. I am living with the older brother and found = out >: from him that his younger brother still has the 64 along with the 1541= and >: I probably could just get it back from him. I was wondering if there = are >: any sources of parts for them anymore. I have been lurking for a whil= e >: and I have been getting all giddy thinking about the old days. It has >: been sitting in a shed for a while so I assume that it might not work = but >: I would like to give it a try. Any info would be appreciated. >: Jason=20 > >Yes, there are many places for parts. One of the bigest is Kasara=20 >Microsystems at 1-800-248-2983. Another is Creative Micro Designs at=20 >1-800-638-3263. Still another is Paxtron at 1-800-595-5534, let me know= =20 >if you need any more. :) By the way-before you power up that system, ge= t=20 >yourself a grounding strap (or attach a wire to a ring and wear the ring= )=20 >and attach it to ground (the screw that holds the face plate of a=20 >electral outlet works well), and clean it out with isopropyl alachol. =20 >Other wise you might burn it out when you try to run it. Unless your planning to put the motherboard on a static mat and grounding= =20 that too, it doesn't do much good to tie yourself to the ground on the=20 outlet. I personally wouldn't even bother with the dust, but if you do t= he=20 proper way to do it is to ground yourself and the motherboard via a stati= c=20 mat. Most people don't even bother grounding at all. As long as the air= is=20 humid and your not working on carpet or linolium you should be fine. >Another tip is to put a fan on the 1541 and power supplies when running=20 >them, makes them last MUCH longer. And when you are cleaning, BE=20 >CAREFUL! Use cotton swabs and watch you don't scrach any heads in the=20 >1541. YOu might want to buy a little computer vacume and suck all the=20 >dust out before you use the swabs (less chance of scratching that way). If you chose to clean the heads don't use rubbing alcohol. Use pure=20 Isopropyl or Denatured. I also would not put a fan on a 1541 unless it i= s=20 summer time and your house is not airconditioned. Do you know how much d= ust=20 gets sucked in? It creates more problems than it solves. To the original poster, your not asking a very consise question. Until y= ou=20 try it out and report it does not work there is no point in asking. #! rnews 3062 Path: pravda.aa.msen.com!news1.best.com!newshub.sdsu.edu!newsfeeder.sdsu.= edu!news.sgi.com!enews.sgi.com!news.mathworks.com!newsfeed.internetmci.co= m!newsxfer2.itd.umich.edu!howland.erols.net!cs.utexas.edu!news.ti.com!new= s.dseg.ti.com!news=09 From: egotrip@lesol1.dseg.ti.com (Mike Neus) Newsgroups: comp.sys.cbm Subject: Re: CKIT - Dongle! Date: 5 Aug 1996 19:11:23 GMT Organization: Texas Instruments Lines: 42 Message-ID: <4u5h0r$e7v@sf18.dseg.ti.com> References: <4tj30o$m5v@escc.corp.es.com> NNTP-Posting-Host: cns0599352.dseg.ti.com Mime-Version: 1.0 Content-Type: Text/Plain; charset=3DUS-ASCII X-Newsreader: WinVN 0.99.7 In article <4tj30o$m5v@escc.corp.es.com>, dvhunt@es.com says... > >In article <4tanq5$48m@mksrv1.dseg.ti.com>, egotrip@lesol1.dseg.ti.com (= Mike Neus)=20 writes: >-> In article <4ssabc$tl@news-e2d.gnn.com>, Eyeth@gnn.com says... >-> > >-> >>users via comp.sys.cbm and BBSs. The best way to market C64/128 >-> >>software today is as shareware. And in particular registration sho= uld >-> >>include a professionaly printed users manual and user support. Of >-> >>course shareware releases need a complete text file based manual as >-> >>well. I'm surprised that any recent C64/128 software releases such= as >-> >>CKIT 94, come with an expensive dongle or any user hostile form of = copy >-> >>protedtion. >-> >> >-> >I disagree. Shareware, even in the IBM world, has not been largely >-> >successful. There are exceptions, of course, like DOOM. ;) It is eit= her >-> >releasing the program as a shareware, but not realistically expectin= g any >-> >revenues, or distributing it through mail order outlets such as SSI = or CMD, >-> >or market the thing themselves. >->=20 >-> I fully agree with your statement Todd. After releasing my own share= ware=20 >-> software I am very disapointed at how many people have sent in money.= Doom=20 >-> (and its look alikes) incidentally are really "crippleware", as it on= ly=20 >-> contains the first level. To play the entire game you need to buy th= e=20 >-> software. That is the only reason it is successful as shareware. An= y future=20 >-> shareware I release will probably be of this form if I can't find a=20 >-> distributer. >->=20 > >DOOM is NOT "crippleware." Crippleware is a shareware program that show= s what >the registered version does, but doesn't actually do it; or it may drast= ically >hinder what the register version actually does. Typical examples of cri= ppleware >are when you have a 5-minute time limit, or a constrained size limit. T= he software >is actually crippled and doesn't fully function. Typically, users HATE = these, but >developers LIKE them because they usually get more registers. The peopl= e that really >want the software outnumber those who get upset and quickly delete it. No, Doom is crippleware. It acts just as you describe. You get a taste = of what it can=20 do by allowing you to play the first level ONLY, which is quick enough ju= st to give you=20 a taste of how the game feels. To get the full version you have to pay f= or it. It is=20 no different from any other form of crippleware. #! rnews 1932 Newsgroups: comp.sys.cbm Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!enews.sgi.com!decwrl= !pagesat.net!abyss!usenet From: abaugher@cancun.bcl.net (Aaron Baugher) Subject: Re: USR Modem X-Newsreader: Gnus v5.1 Reply-To: abaugher@bcl.net Sender: abaugher@cancun.bcl.net Organization: Basic Communications, Ltd. Message-ID: References: <19960806.163910.09@clares.demon.co.uk> In-Reply-To: GONews@clares.demon.co.uk's message of Tue, 06 Aug 1996 16:3= 9:10 GMT X-Nntp-Posting-Host: cancun.bcl.net Date: Thu, 8 Aug 1996 14:35:36 GMT Lines: 31 From: GONews@clares.demon.co.uk Date: Tue, 06 Aug 1996 16:39:10 GMT Anyone know if it's possible to connect a US Robotics 14400 fax/modem to the C64? If so, do I need anything else in between to amke it work? You could hook it to the user port, with an RS-232 adapter, and get 2400bps. Or, you could do Daniel Dallmann's (sp?) 9600bps user port hardware hack. (sorry, I don't have his web address handy) Or, you could buy a Swiftlink for about $40 from CMD and get 14.4Kbps, with up to 38400 between computer and modem. Pointers to all these things can be found in the FAQ. Is there any NET software at any site that I can go fetch that will allow me to access web sites and send and receive mail? Your best bet would be to get a Unix shell account from your provider. TCP/IP on the C=3D is still in the development stages, so there are no C=3D-native browsers or SMTP-compliant mail programs (yet). With a shell account, you'll be able to do all that (text based), and usually faster than a PC user who runs all those things locally. Aaron --=20 -------------------------------------------------------- Aaron J. Baugher http://www.bcl.net/~abaugher Software Engineer abaugher@bcl.net Basic Communications, Ltd. _Roark_ on IRC -------------------------------------------------------- #! rnews 2282 Newsgroups: comp.sys.cbm Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!enews.sgi.com!decwrl= !pagesat.net!abyss!usenet From: abaugher@cancun.bcl.net (Aaron Baugher) Subject: Re: Programmers wanted! X-Newsreader: Gnus v5.1 Reply-To: abaugher@bcl.net Sender: abaugher@cancun.bcl.net Organization: Basic Communications, Ltd. Message-ID: References: <1996Aug5.144538@nyssa.swt.edu> <4u64rg$csb@news2.h1.usa.pipeline.com> In-Reply-To: wanderer_rtc@usa.pipeline.com's message of 6 Aug 1996 00:49:= 52 GMT X-Nntp-Posting-Host: cancun.bcl.net Date: Thu, 8 Aug 1996 14:50:20 GMT Lines: 35 From: wanderer_rtc@usa.pipeline.com(R. T. Cunningham) Date: 6 Aug 1996 00:49:52 GMT On Aug 05, 1996 14:45:38 in article , 'ez13942@nyssa.swt.edu (Bo)' wrote:=20 Exactly what I meant by not really. As great as the hardware is, it's limited by the software itself. Will people rush and put an order in = for GEOS because of the SuperCPU? I seriously doubt it.=20 I bought my first 128D, and Geos128, in appr. 1988. Since then, about once a year, I dig Geos out, and give it a shot. I've even purchased some apps for it, like TopDesk and Gateway128. However, it always goes back on the shelf after a while. The two main reasons: lack of speed and lack of applications; mainly the lack of speed. Geos is pretty nice with an REU, but at some point you do have to use floppies, and loading all those icons off floppy is just too slow. (It always makes me think, "This is what Windows would be without really fast processors.) Therefore, when I get my SuperCPU128, I'm sure I'll dig out Geos and give it another shot, and if it runs fast enough, I may buy some more apps for it. (I'm working right now on getting Gateway128 working, now that I've upgraded my HD-DOS to a new enough version.) So in some cases, while it may not sell a new copy of Geos, it may sell some things for the third-party Geos programmers out there. Aaron --=20 -------------------------------------------------------- Aaron J. Baugher http://www.bcl.net/~abaugher Software Engineer abaugher@bcl.net Basic Communications, Ltd. _Roark_ on IRC -------------------------------------------------------- #! rnews 994 Path: pravda.aa.msen.com!spool.mu.edu!news.sgi.com!enews.sgi.com!news.mat= hworks.com!nntp.primenet.com!winternet.com!n1ott.istar!ott.istar!istar.ne= t!tor.istar!east.istar!news.nstn.ca!news.dal.ca!pchase From: pchase@is.dal.ca (PCHASE) Newsgroups: comp.sys.cbm Subject: Re: ?: CMD HD and Geos Date: 8 Aug 1996 20:14:12 GMT Organization: Dalhousie University Lines: 10 Message-ID: <4udhqk$re7@News.Dal.Ca> References: <4u9fk1$htj@ns1.net-gate.com> <1996Aug7.163843@nyssa.swt.edu> NNTP-Posting-Host: is.dal.ca X-Newsreader: TIN [version 1.2 PL2] Bo (ez13942@nyssa.swt.edu) wrote: : If you are an icon junky like myself, then you'll appreciate any abilit= y=20 : to use your CMD HD and RamLink from the regular GEOS deskTop no matter : what other limitations come with it... I hate not being able to use native partitions with GEOS and would use=20 it if there was a way to do so. But I like the way gateWay work anyway=20 so it not that bad. I just like to have subdirectories for each applicat= ion. #! rnews 2058 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!enews.sgi.com!news.m= athworks.com!newsfeed.internetmci.com!in2.uu.net!cs.utexas.edu!news.ti.co= m!news.dseg.ti.com!news=09 From: egotrip@lesol1.dseg.ti.com (Mike Neus) Newsgroups: comp.sys.amiga.misc,comp.sys.cbm,dfw.general Subject: Commodore/Amiga User Group Metting (Dallas, Tx USA) Date: 8 Aug 1996 16:44:15 GMT Organization: Texas Instruments Lines: 29 Message-ID: <4ud5gv$pge@sf18.dseg.ti.com> NNTP-Posting-Host: cns0599352.dseg.ti.com Mime-Version: 1.0 Content-Type: Text/Plain; charset=3DUS-ASCII X-Newsreader: WinVN 0.99.7 Xref: pravda.aa.msen.com comp.sys.amiga.misc:130488 comp.sys.cbm:59224 df= w.general:18768 Society of Commodore Users and PET Enthusiasts Meeting Announcement (Dallas, Texas USA) The Society of Commodore Users and PET Enthusiasts (SCOPE) is a club devo= ted to all Commodore computers, including PET, C64/128, Amiga, as well as som= e of the rarer machines. SCOPE meets at the Infomart as part of the "Super Saturday" event. If you are looking for Commodore support, news, convers= ation, or are just curious, check us out. Our next meeting is Saturday, Aug 10, 3rd floor room 3008. The schedule is as follows: 9:00 am - 12:00pm Vendor sale (Infomart Basement) 12:00pm - 1:00pm SCOPE club business (Room 3008) 1:00 pm - 4:00pm User group workshop (Room 3008) This month is open agenda for both the Amiga and Classic Commodore groups. Unfortunately the people that regularly bring Classic Commodore hardware = will not be availible this month. This means only an Amiga 2000 will be avail= ible, although anyone is free to bring their own hardware. The Dallas Infomart is located about two miles north of downtown Dallas a= t the intersection of 35E and Oak Lawn. Take the Oak Lawn exit, Informat is th= e big white "palace" on the north bound side of 35E. Parking is free. If you have further questions, please E-mail me at Egotrip@lesol1.dseg.ti= .com or call the SCOPE support BBS, The Mars Den, at (214) 276-6721. Mike Neus Egotrip@lesol1.dseg.ti.com #! rnews 3081 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!enews.sgi.com!news.m= athworks.com!newsfeed.internetmci.com!news.ycc.yale.edu!yale!news-mail-ga= teway!daemon From: Irv Cobb Newsgroups: comp.sys.cbm Subject: (none) Date: 8 Aug 1996 14:00:16 -0400 Organization: Yale CS Mail/News Gateway Lines: 67 Sender: daemon@cs.yale.edu Message-ID: <19960808140011.aaaa000z2@babyblue.cs.yale.edu> NNTP-Posting-Host: babyblue.cs.yale.edu From irv_cobb@sr.radiks.netThu Aug 8 12:41:41 1996 Date: Wed, 7 Aug 1996 22:59:47 -0500 (CDT) From: Irv Cobb To: irv_cobb@radiks.net Newsgroups: comp.sys.cbm Subject: (fwd) Re: ?: CMD HD and Geos ez13942@nyssa.swt.edu (Bo) wrote: >In article <4u9fk1$htj@ns1.net-gate.com>, jezzydee@ns1.net-gate.com=20 >(Jezebel Rebecca Delilah) writes: >=20 >> Okay, I have a question for the CMD HD users out there :)=20 >>=20 >> I am considering buying a CMD HD for my 128. I use Geos a lot for=20 >> stuff. My question is this: Does the new desktop (I forget it's name)=20 >> have a way for you to select current path ( change directories ) while= =20 >> inside a application? > > If you are talking about gateWay, the answer is no. There's a DA on the Collette Utilities Disk that wil let you do this, but= =20 it's pretty easy to confuse the system. Actually, you can get quite alot= =20 of stuff in a 1581 partition, so there's less need to change paths than=20 you might think. >>=20 >> I assume this would be a new disk/drive selcetion window, or=20 >> under Geos in the button bar. > >This would require changes to the app itself, which would probably mean >the app would only run under gateWay.... Actaully, maybe just to the DeskTop and kernel. But big changes=20 nonetheless, and I don't know that anyone's woking on such a thing. >>=20 >> At any rate, if there is NO way to select path from inside a=20 >> application, how does one get in and out of directories in the HD? Or=20 >> must everything you want accessed by GEOS be in the GEOS directory? >From within the gateWay desktop, correct. If you are using the GEOS >deskTop, CMD gives you a program to select partitions, since they >only support 1581 emulation partitions on the CMD HD while using the >regular GEOS desktop. The speed and capacity are nice though. If you >are an icon junky like myself, then you'll appreciate any ability to=20 >use your CMD HD and RamLink from the regular GEOS deskTop no matter >what other limitations come with it... And if you don't require icons, I have found DualTop and GeoSHELL to be a= =20 great combination. (And actually, they give me better support from my 2=20 meg BBGRAM than GateWay.) >>=20 >> Thank in advance... ... > - Bo =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D | irv_cobb@radiks.net http://www.radiks.net/irv_= cobb | | "Listen, for I will speak Files for Commodore = Geos | | of excellent things..." Links to GARBC organizat= ions | =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D #! rnews 1320 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!enews.sgi.com!news.m= athworks.com!newsfeed.internetmci.com!newsxfer2.itd.umich.edu!howland.ero= ls.net!cs.utexas.edu!news.swt.edu!nyssa.swt.edu!ez13942 From: ez13942@nyssa.swt.edu (Bo) Newsgroups: comp.sys.cbm Subject: Re: Programmers wanted! Date: 8 Aug 96 13:09:52 CDT Organization: Southwest Texas State University Lines: 20 Message-ID: <1996Aug8.130952@nyssa.swt.edu> References: <3206E66F.6B3B@= cube.net> NNTP-Posting-Host: nyssa.swt.edu > Work on Geos is already going on. Falk Rehwagen had a major revision > ready at around 70 percent, featuring a "big" listbox (without using a > REU), device drivers for all hardware parts (allowing better > expandability) and more. He had to leave the project but gave it to > another programmer (Wolfgang Grimm) so I expect un update to Geos 3.0 > released some day. Before that, there will be updates to TopDesk 128 > (first) and TopDesk 64 (after that) with many great enhancements. >=20 > After all, don`t forget the international programmers in your count, > there are a lot... >=20 > Matthias Will this be available in the U.S.? For that matter, is TopDesk available in the U.S now? =20 > --=20 > Please reply to: mmatting@aol.com - old email at cube.net will change > soon #! rnews 783 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!enews.sgi.com!news.m= athworks.com!newsfeed.internetmci.com!chi-news.cic.net!News1.mcs.net!in-n= ews.erinet.com!bug.rahul.net!rahul.net!a2i!ns2.mainstreet.net!jaxnet.sout= heast.net!users!kickass From: kickass@users.jaxnet.com (kickass) Newsgroups: comp.sys.cbm Subject: can a 64 w/ a 1581 read LD pc disks? Date: 8 Aug 1996 18:32:23 GMT Organization: Southeast Network Services, Inc. Lines: 6 Message-ID: <4udbrn$93m@jaxnet.southeast.net> NNTP-Posting-Host: users.southeast.net X-Newsreader: TIN [version 1.2 PL2] Yup, thats my question... is there any software for the 64 that would=20 allow it to read low density pc disks via the 1581 drive? (I'm still=20 trying to figure out how to get 64 software from my Amiga to my 64...) Zilla #! rnews 1735 Path: pravda.aa.msen.com!news1.best.com!nntp04.primenet.com!news.shkoo.co= m!nntp.primenet.com!news.sprintlink.net!news-stk-3.sprintlink.net!news.ma= thworks.com!newsfeed.internetmci.com!newsxfer2.itd.umich.edu!howland.erol= s.net!surfnet.nl!sun4nl!sci.kun.nl!rhialto From: rhialto@mbfys.kun.nl (Olaf Seibert) Newsgroups: comp.sys.cbm Subject: Re: CBM 80xx Date: 8 Aug 1996 19:14:20 GMT Organization: University of Nijmegen, The Netherlands Lines: 20 Message-ID: <4udeac$ppa@wn1.sci.kun.nl> References: <4u6= pkl$edo@tuegate.tue.nl> <4u70is$7ll@toad.stack.urc.tue.nl> <4u71io$h92@tu= egate.tue.nl> <4u73k4$1lt@toad.stack.urc.tue.nl> <4u7bl2$li5@tuegate.tue.= nl> NNTP-Posting-Host: vitellius.mbfys.kun.nl X-Newsreader: NN version 6.5.0 #7 (NOV) In <4u7bl2$li5@tuegate.tue.nl> martijnb@mud.stack.urc.tue.nl (Martijn van= Buul) writes: >My PET doesn't have an internal tapedrive. As the matter affect, I use t= he >same tapedrive for both PET and C64. However, the PET seems to have prob= lems >reading the C64 tapes ( I can't even transfer data bytewise. The PET rea= ds >the file header, but that's about it.). I *do* have a scheme how to turn >my 1541 into a 2031 (=3D=3D IEEE port), but that hack requires an EPROMm= er, wich >I haven't got... Remember that the PET does not have a relocating loader. It expects Basic programs to be at $0401 and it does not move them if they aren't. Also the PET does not understand C64 files saved with SAVE "x",1,1. It does not know that type of file headers and just moves on to the next one. >Martijn -Olaf. -- ___ Olaf 'Rhialto' Seibert rhialto@mbfys.kun.nl The only excuse \X/ for making a useless thing is that one admires it intensely. -O.W. #! rnews 3153 Path: pravda.aa.msen.com!spool.mu.edu!munnari.OZ.AU!news.mel.connect.com.= au!news.mira.net.au!news.vbc.net!samba.rahul.net!rahul.net!a2i!olivea!new= s.sgi.com!enews.sgi.com!news.mathworks.com!newsfeed.internetmci.com!netne= ws.nwnet.net!news.u.washington.edu!carson.u.washington.edu!rrcc From: Raymond Carlsen Newsgroups: comp.sys.cbm Subject: Re: Is my C=3D64 dead? Date: Thu, 8 Aug 1996 15:05:15 -0700 Organization: University of Washington Lines: 42 Message-ID: References: NNTP-Posting-Host: carson.u.washington.edu Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=3DUS-ASCII To: "B. Taylor" In-Reply-To: > I've recently joined the 8-bit revolution with my purchase of a c=3D64 > at a local thrift store($12). The TV that i have access to has a > coaxial "f" type connector on the back (i don't actually own a tv; > although i'm tempted to buy one for a c=3D64 unless someone wants to > sell me a C=3D color monitor!). Anyway, I went down to radio shack and > braved the usual unpleasant experience with the always rude and > condescending employees and bought a switchbox with a phono jack in > and a "f" out as well as a video phono cable. When I got home I > plugged the cable into C=3D64 tv out jack and into the switchbox. Then > I pushed the switch to "computer/game" and plugged the "f" coax into > the TV. At this point I was getting close and my mind was attempting > to salvage the remains of BASIC left in my memory. So, I plugged in > the power supply and turned on the c=3D64 and ...........a blank green > screen. What a let down! > > So, much questions are: is my c=3D64 dead? what could be wrong? can i f= ix > it or is it destined for parts? You represent a great challange for a repair tech. I can give you some general information, but unless you're willing to take it all the way to a solution, it just might be a "parts" source. Many users opt not to repair, since working computers and drives are so plentiful on garage sales, flea markets, etc. Since you've got something on the TV screen, it appears that the antenna (RF) hookup is OK. The most common failures of the C64 are the power pack and the PLA chip. If the power pack had failed, I don't believe you would have a "green" screen... just black. Is the little red LED lit on the computer? That is an indicator of +5 volts from the supply. Did you get a disk drive with the 64? It would tell you if the computer were trying to work by it's red LED coming on, then off when the computer were powered up (active reset). With the power supply and chips inside the computer, substitution with a know good one is the only practical way to test things. Without some support (a second 64, a drive, etc.), I don't know how to tell you to proceed. Sorry. If you can find a local user group or friendly tech type, you might have a shot. Parts are still available from several sources. Ray Carlsen CARLSEN ELECTRONICS... A leader in trailing-edge technology. #! rnews 802 Path: pravda.aa.msen.com!spool.mu.edu!news.sgi.com!swrinde!howland.reston= .ans.net!news-e2a.gnn.com!pop.gnn.com!Eyeth From: Eyeth@gnn.com (Todd Elliott) Newsgroups: comp.sys.cbm Subject: GEOProgrammer Help Date: Thu, 08 Aug 1996 18:17:31 Organization: GNN Lines: 12 Message-ID: <4udp19$q4b@news-e2c.gnn.com> NNTP-Posting-Host: 37-220.client.gnn.com Mime-Version: 1.0 Content-Type: text/plain; charset=3D"us-ascii" X-GNN-NewsServer-Posting-Date: 8 Aug 1996 22:17:13 GMT X-Mailer: GNNmessenger 1.3 I've just got GEOProgrammer. It does not run in 128 mode. I thought that = it could run in both modes? Is there some updated files which will enable it to run in 128 mode? Thanks! Todd {.sig starts here!} Todd Elliott C128D Nirvana Enthusiast! telliott@ubmail.ubalt.edu University of Baltimore School of Law #! rnews 1892 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!swrinde!cs.utexas.ed= u!news.ti.com!news.dseg.ti.com!news=09 From: egotrip@lesol1.dseg.ti.com (Mike Neus) Newsgroups: comp.sys.cbm Subject: Re: lha help needed Date: 8 Aug 1996 18:41:58 GMT Organization: Texas Instruments Lines: 32 Distribution: na Message-ID: <4udcdm$rlg@sf18.dseg.ti.com> References: <4tm2iu$r24@omnifest.uwm.edu> <4tmkfa$b1g@ocean.CAM.ORG> <4tq= jkp$e3g@mksrv1.dseg.ti.com> <4tqpua$aq5@ocean.CAM.ORG> NNTP-Posting-Host: cns0599352.dseg.ti.com Mime-Version: 1.0 Content-Type: Text/Plain; charset=3DUS-ASCII X-Newsreader: WinVN 0.99.7 In article <4tqpua$aq5@ocean.CAM.ORG>, ismael@CAM.ORG says... > >Mike Neus (egotrip@lesol1.dseg.ti.com) wrote: >> In article <4tmkfa$b1g@ocean.CAM.ORG>, ismael@CAM.ORG says... >> > >> >Andrew R. McInnis (amcinnis@omnifest.uwm.edu) wrote: >> >> does anyone know of a ftp site where i can get a program to dissolv= e=20 .lha >> >> files??? >> > >> >Assuming that you want to dissolve them on a Commodore 8-bit computer= ,=20 the >> >only way is on a C128 in CP/M mode, using PMEXT.COM. It can be found=20 inside >> >PMAUTOAE.COM, a self-extracting PMA archive, at ftp.cam.org, director= y >> >/users/ismael/cpm/archivers. > >> You havn't discovered CS-DOS yet, have you? There is both an lha crea= ter >> and disolver as part of this package. Check out >> ccnga.uwaterloo.ca/pub/cbm/cs-dos. You'll be glad you did! > >Yes, I've discovered CS-DOS many years ago and also its programs lha, lh= x >and lhd. However we're talking here about archives with the .lha extensi= on >which are not dissolved by CS-DOS' lhx because they use the lh5 compress= ion >method. CS-DOS' lhx and lha only handles the lh1 compression method. > >You haven't learned to check the information before posting here yet, ha= ve >you? I don't think it says anywhere in here which version of lha it is. Maybe= you=20 should learn to read posts! #! rnews 694 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!uhog.mit.edu!news.ma= thworks.com!newsfeed.internetmci.com!in2.uu.net!news.idt.net!news From: jms7@mail.idt.net (jms7@mail.idt.net) Newsgroups: comp.sys.cbm Subject: Setting drives to device #12+ ?? Date: Thu, 08 Aug 1996 18:41:35 GMT Organization: IDT Corporation Lines: 6 Message-ID: <4udcod$qil@News.IDT.NET> Reply-To: jms7@mail.idt.net NNTP-Posting-Host: ppp-33.ts-5.nyc.idt.net X-Newsreader: Forte Free Agent 1.0.82 How do I set Commodore disk drives to device numbers higher than 11? =20 I seem to remember a software method, but I'd prefer to do it in the hardware so I don't have to reconfigure everthing each time I boot the system. #! rnews 1895 Path: pravda.aa.msen.com!spool.mu.edu!news.sgi.com!enews.sgi.com!news.mat= hworks.com!newsfeed.internetmci.com!in3.uu.net!ott.istar!istar.net!van.is= tar!west.istar!n1van.istar!van-bc!unixg.ubc.ca!rover.ucs.ualberta.ca!news= .ucalgary.ca!srv1.freenet.calgary.ab.ca!pdporth From: Phil Porth Newsgroups: comp.sys.cbm Subject: Re: USR Modem Date: Thu, 8 Aug 1996 16:09:27 -0600 Organization: Calgary Free-Net Lines: 25 Message-ID: References: <19960806.163910.09@clares.demon.co.uk> NNTP-Posting-Host: pdporth@srv1.freenet.calgary.ab.ca Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=3DUS-ASCII To: GONews@clares.demon.co.uk In-Reply-To: <19960806.163910.09@clares.demon.co.uk> On Tue, 6 Aug 1996 GONews@clares.demon.co.uk wrote: > Anyone know if it's possible to connect a US Robotics 14400 fax/modem t= o the > C64? If so, do I need anything else in between to amke it work? YES, I do it all the time. You need a SwiftLink, Hart, or Datapump RS232 interface cartridge. These will permit connecting a modem at up to 38.4k or more depending on the cart. If you plan on using it asa fax as well you should make sure that the modem is capable of running GeoFax as this is the only currently available program. If you are a geos user then there is a program written being written for the 128 that will be a Graphic Web browser. and yes, most of these answers are in the CBM FAQ. > Is there any NET software at any site that I can go fetch that will all= ow me > to access web sites and send and receive mail? Using any program that can emulate a vt102 you can use a 64/128 and a Dos Shell account to access the Internet, e-mail, and FTP site access. Phil Porth (aka Phone Man) From the land of the frozen North, Calgary Alberta Canada Home of the Calgary Stampede and Calgary Commodore Users Group #! rnews 1127 Path: pravda.aa.msen.com!spool.mu.edu!agate!howland.erols.net!cs.utexas.e= du!news.sprintlink.net!news-stk-200.sprintlink.net!news.mathworks.com!new= sfeed.internetmci.com!in3.uu.net!EU.net!Norway.EU.net!oslonett.no!sn.no!n= ewsfeed.tip.net!newsfeed1.telia.com!d1o2.telia.com!usenet From: m9944@abc.se (Peter Karlsson) Newsgroups: comp.sys.cbm Subject: Re: CBM 80xx Date: Thu, 08 Aug 1996 22:01:33 GMT Organization: http://www.mds.mdh.se/~dat95pkn Lines: 15 Message-ID: <4udp05$r04@d1o2.telia.com> References: <4u6= pkl$edo@tuegate.tue.nl> NNTP-Posting-Host: t4o2p7.telia.com X-Newsreader: Forte Free Agent 1.0.82 In article <4u6pkl$edo@tuegate.tue.nl>, martijnb@mud.stack.urc.tue.nl (Martijn van Buul) wrote: > The only problem is to get those (basic) files into a PET.=20 PC -> 1541 via StarCommander, and then via a 4040 drive to the PET, perhaps? Does anyone know if it possible to adapt StarCommander for use with a parallel IEEE interface (like a 4040 or 8050)? \\// Peter - m9944@abc.se - Fidonet 2:204/145.42 - May not be distributed via the microsoft network #! rnews 1675 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!swrinde!cssun.mathcs= .emory.edu!hobbes.cc.uga.edu!cacimbo!btaylor From: "B. Taylor" Newsgroups: comp.sys.cbm Subject: Is my C=3D64 dead? Date: Thu, 8 Aug 1996 15:17:32 -0400 Organization: University of Georgia, Athens Lines: 26 Message-ID: NNTP-Posting-Host: cacimbo.ggy.uga.edu Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=3DUS-ASCII X-Sender: btaylor@cacimbo Hello: I've recently joined the 8-bit revolution with my purchase of a c=3D64 at a local thrift store($12). The TV that i have access to has a coaxial=20 "f" type connector on the back (i don't actually own a tv; although i'm=20 tempted to buy one for a c=3D64 unless someone wants to sell me a C=3D co= lor=20 monitor!). Anyway, I went down to radio shack and braved the usual=20 unpleasant experience with the always rude and condescending employees=20 and bought a switchbox with a phono jack in and a "f" out as well as a=20 video phono cable. When I got home I plugged the cable into C=3D64 tv ou= t=20 jack and into the switchbox. Then I pushed the switch to "computer/game"=20 and plugged the "f" coax into the TV. At this point I was getting close=20 and my mind was attempting to salvage the remains of BASIC left in my=20 memory. So, I plugged in the power supply and turned on the c=3D64 and=20 ...........a blank green screen. What a let down! So, much questions are: is my c=3D64 dead? what could be wrong? can i fix= =20 it or is it destined for parts? I also attempted to plug the c=3D64 straight into the TV with a phono->"f= "=20 plug converter and I got the same thing. Thanks for any help. -brad =20 #! rnews 1005 Path: pravda.aa.msen.com!news1.best.com!news.sgi.com!enews.sgi.com!news.m= athworks.com!newsfeed.internetmci.com!in2.uu.net!news.PBI.net!usenet From: Peter Yiakis Newsgroups: comp.sys.cbm Subject: FS: CBM 401 Mech Calculator Date: Thu, 08 Aug 1996 12:28:14 -0700 Organization: A customer of Pacific Bell Internet Services Lines: 11 Message-ID: <320A3FCE.5B74@pacbell.net> Reply-To: geeklab@pacbell.net NNTP-Posting-Host: ppp-3-18.okld03.pacbell.net Mime-Version: 1.0 Content-Type: text/plain; charset=3Dus-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 3.0b5 (Win95; U) For Sale: Complete your commodore collection with a Commodore model 401 mechanical calculator. It prints on tape, and has the C=3D logo and name on the front. It is in fair to good condition. I have no idea what it is worth, so best bid gets it. I am in the San Francisco area if you can pick it up, otherwise shipping is on the buyer. Please E-mail me if interested. Peter Yiakis geeklab@pacbell.net